Maintenance tips for screen printing machines when not in use
Maintenance methods for screen printing machines:
1. The entire screen printing machine uses full touch screen control, so the touch screen is easily damaged, so it is strictly forbidden to be hit or scratched by hard objects or sharp tools. Users should wipe and refuel the screen printing machine at least once a week as required;
2. Regularly check the water accumulation in the filter cup of the screen printing machine, drain the water once per shift, and avoid bringing water into the cylinder. Lubricating oil should be regularly added to each lubrication point to ensure the normal operation of the screen printing machine equipment;
3. Before starting the machine each time, you must first understand the machine Within the operating range of the machine, connect the air source and power supply, and check the operation of the machine. It can be put into production only when it is operating normally;
4. Please try to keep the screen printing machine clean. If there is dirt, please wipe it with a soft and clean dry cloth; if the dirt is difficult to remove, you can add a little neutral detergent to wipe it. It is strictly forbidden to use alcohol or diluent to wipe it;
5. The main part of the equipment is disassembled for inspection and adjustment, including cleaning of the motor, checking the technical status, replacing lubricating oil, etc.; some parts that have reached the specified wear limit are replaced, such as bearing key pins, electrical and pneumatic components, etc.
1. Work, measuring, clamping, cutting tools, workpieces, raw materials, etc. cannot be placed on the screen printing machine equipment.
2. It should be ensured that there is no dust and dust, oil, lint, scratches, etc. at the joint between the movable guide surface and the guide surface of the screen printing machine.
3. Do not disassemble the touch screen without the guidance of a professional master, as it may damage the touch screen;
4. If the screen printer is not used for a long time, the screen printer should be wiped clean and placed in a cool, dry and well-ventilated environment;
5. When the screen printer fails, the emergency stop switch must be pressed immediately to turn off the main power supply and notify the maintenance personnel;
6. In the daily maintenance of the screen printer, it is strictly forbidden to disassemble parts and components. If there is any abnormality, the machine should be stopped immediately;
7. The equipment must be regularly inspected, precision checked, adjusted, and fault analysis and status monitoring must be carried out;
The daily maintenance of the screen printer should be done every day, which will not only extend the service life of the screen printer, but also make it smoother during normal use, thereby printing satisfactory products.
